.svg?width=180&height=50)
RAK1
Normal Duty Pillow Block Ball Bearing Unit, 1 Inch Inside Diameter, 4.126 Inch Bolt Centers, 1.313 Inch Base to Bore Centerline, 5-1/2 Inch Overall Length, 2.748 Inch Overall Height, Non-Expansion
MFG #RAK1
IBT #00845001109
- Base Width: 1.469 InchBolt Center-to-Center Length: 4.126 InchBore Diameter: 1Expansion Type: Non-Expansion (Fixed)Finish: UncoatedLoad Capacity: 3600 lb Dynamic/1700 lb StaticLocking Device: Eccentric CollarMaterial: Cast IronMaximum Speed: 5440 RPMMounting Type: Two-Bolt BaseOverall Height: 2.748 InchOverall Length: 5-1/2 InchOverall Width: 1-3/4 InchSeal Type: ShroudSeries: RAKTemperature Rating: 250 °FType: Normal Duty
- Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1 in Bore, 4.126 in Bolt Center-to-Center Length, 1.313 in Base to Bore Centerline, 5-1/2 in Overall Length, 1-3/4 in Overall Width, 2.748 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.469 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 3600 lb Dynamic/1700 lb Static Load, 250 °F, 5440 RPM Maximum, Cast Iron, Uncoated
Timken RAK1Normal Duty Pillow Block Ball Bearing Unit, 1 Inch Inside Diameter, 4.126 Inch Bolt Centers, 1.313 Inch Base to Bore Centerline, 5-1/2 Inch Overall Length, 2.748 Inch Overall Height, Non-Expansion
IBT #00845001109
MFG #RAK1