.svg?width=180&height=50)
RAK1 1/2
Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 Inch Inside Diameter, 5.374 Inch Bolt Centers, 1.937 Inch Base to Bore Centerline, 7.063 Inch Overall Length, 4 Inch Overall Height, Non-Expansion
MFG #RAK1 1/2
IBT #00845001115
- Base to Bore Centerline: 1.937 InchBase Width: 2.031 InchBolt Center-to-Center Length: 5.374 InchBore Diameter: 1-1/2 InchBore Type: RoundExpansion Type: Non-Expansion (Fixed)Finish: UncoatedLoad Capacity: 8100 lb Dynamic/4400 lb StaticLocking Device: Eccentric CollarMaterial: Cast IronMaximum Speed: 3500 RPMMounting Type: Two-Bolt BaseOverall Height: 4 InchOverall Length: 7.063 InchOverall Width: 2-7/32 InchSeal Type: ShroudSeries: RAKTemperature Rating: 250 °FType: Normal Duty
- Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1-1/2 in Bore, 5.374 in Bolt Center-to-Center Length, 1.937 in Base to Bore Centerline, 7.063 in Overall Length, 2-7/32 in Overall Width, 4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.031 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 8100 lb Dynamic/4400 lb Static Load, 250 °F, 3500 RPM Maximum, Cast Iron, Uncoated
Timken RAK1 1/2Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 Inch Inside Diameter, 5.374 Inch Bolt Centers, 1.937 Inch Base to Bore Centerline, 7.063 Inch Overall Length, 4 Inch Overall Height, Non-Expansion
IBT #00845001115
MFG #RAK1 1/2