.svg?width=180&height=50)
RAK1 1/4
Normal Duty Pillow Block Ball Bearing Unit, 1-1/4 Inch Inside Diameter, 5.126 Inch Bolt Centers, 1.813 Inch Base to Bore Centerline, 6.563 Inch Overall Length, 3.689 Inch Overall Height, Non-Expansion
MFG #RAK1 1/4
IBT #00845001124
- Base to Bore Centerline: 1.813 InchBase Width: 1.843 InchBolt Center-to-Center Length: 5.126 InchBore Diameter: 1-1/4 InchBore Type: RoundExpansion Type: Non-Expansion (Fixed)Finish: UncoatedLoad Capacity: 6400 lb Dynamic/3400 lb StaticLocking Device: Eccentric CollarMaterial: Cast IronMaximum Speed: 3930 RPMMounting Type: Two-Bolt BaseOverall Height: 3.689 InchOverall Length: 6.563 InchOverall Width: 2-1/64 InchSeal Type: ShroudSeries: RAKTemperature Rating: 250 °FType: Normal Duty
- Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1-1/4 in Bore, 5.126 in Bolt Center-to-Center Length, 1.813 in Base to Bore Centerline, 6.563 in Overall Length, 2-1/64 in Overall Width, 3.689 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.843 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 6400 lb Dynamic/3400 lb Static Load, 250 °F, 3930 RPM Maximum, Cast Iron, Uncoated
Timken RAK1 1/4Normal Duty Pillow Block Ball Bearing Unit, 1-1/4 Inch Inside Diameter, 5.126 Inch Bolt Centers, 1.813 Inch Base to Bore Centerline, 6.563 Inch Overall Length, 3.689 Inch Overall Height, Non-Expansion
IBT #00845001124
MFG #RAK1 1/4