Lubriplate® synthetic high temp fluids are 100% ester based synthetic fluids specifically designed for use on oven chains and other industrial bearing and gear applications in which high temperatures are encountered. The combination of an ashless additive system and the synthetic ester base provide protection against wear, rust, oxidation and corrosion. Both fluids utilize an enhanced coefficient of friction additive which will disperse and clean pre-existing carbon deposits on chains and bearings thereby reducing power consumption. These products deliver unsurpassed oxidation stability and anti-coking performance. They remain stable and clean in the application. Lubriplate® synthetic high temp fluids are recommended for use on bakery oven chains, drying oven chains, tenter frame chains, heat-treating chains, paint curing oven chains and any other type of bearing/slide/gear box application where they are exposed to high operating temperatures and must maintain a clean lubricated surface. Lubriplate® synthetic high temp fluids can be fed through micro lube systems, spray systems, mist systems, drip bottle systems and can be hand applied. When lubricating a hot chain, position the lubricator at the coolest point on the chain and use the minimum volume necessary to properly lubricate the chain. This will help prevent smoking of the lubricant once it reaches the hottest point in the oven. Lubriplate® Chain and Cable Lubricant, High Temperature, Drum, 55 gal, Synthetic Ester Base, Liquid, Amber, Odor/Scent: Mild, 0.97 Specific Gravity, 554 °F Flash, 1112 SUS at 100 °F Viscosity, 626 °F Pour, Flammability: 1, Grade ISO 220/SAE 90