
7 5V 2800 J
Wedge Stock Sheave, Arm/Spoke Type C-3, QD® Bushed Bore, 1-1/2 to 3-3/4 in Bore, 28 in OD, 27.9 in Pitch Diameter, 7 Grooves, 5-1/8 in Face Width, J Bushing, 4-1/2 in Overall Length, For Use With: 5V-Cross Section V-Belts, Gray Cast Iron
Factory Order
MFG #7 5V 2800 J
IBT #00568092091
- Bore Diameter: 1-1/2 to 3-3/4 InchBore Type: QD® BushedBushing Type: JFace Width: 5-1/8 InchMaterial: Gray Cast IronNumber of Grooves: 7Outside Diameter: 28 InchOverall Length: 4-1/2 InchPitch Diameter: 27.9 InchSuitable For Use With: 5V-Cross Section V-BeltsType: Arm/Spoke Type C-3Width: 28
- Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V and 8V belts. Martin Hi-Cap® Wedge Stock Sheave, Arm/Spoke Type C-3, QD® Bushed Bore, 1-1/2 to 3-3/4 in Bore, 28 in OD, 27.9 in Pitch Diameter, 7 Grooves, 5-1/8 in Face Width, J Bushing, 4-1/2 in Overall Length, For Use With: 5V-Cross Section V-Belts, Gray Cast Iron
Martin Sprocket & Gear 7 5V 2800 JWedge Stock Sheave, Arm/Spoke Type C-3, QD® Bushed Bore, 1-1/2 to 3-3/4 in Bore, 28 in OD, 27.9 in Pitch Diameter, 7 Grooves, 5-1/8 in Face Width, J Bushing, 4-1/2 in Overall Length, For Use With: 5V-Cross Section V-Belts, Gray Cast Iron
IBT #00568092091
MFG #7 5V 2800 J