FAG housings and the associated bearings form bearing units that have proven successful in machinery, plant and equipment. FAG bearing housings are predominantly made from cast iron. We can supply housings made from cast steel or spheroidal graphite cast iron by agreement. Since the bearings are generally lubricated with grease and the initial grease filling lasts for a long period, most housings do not have relubrication holes. However, there are cast-on bosses or marks present so that lubrication holes can be made if necessary. If relubrication is carried out, it must be ensured that excess grease is allowed to escape. FAG Split Plummer Block Housing, Series: SNG, 30 mm ID, 50 mm Base to Bore Centerline, 185 mm Overall Length, 82 mm Overall Width, 92 mm Overall Height, Compatible Bearing Type: Self-Aligning Ball and Spherical Roller Bearings, 150 mm Bolt Center-to-Center Length, 52 mm Base Width, Cast Iron, Gray